Product Code: CPANEL
Delivery: 1 - 2 Days
A single smoke ventilation control panel can be installed so it operates on the instruction of the fire service. You can also install our control panel so it operates on receipt of a fire signal from a smoke detector or manually by a control point.
For larger buildings we also offer a networked system by means of distributing control panels around the building that each control a zone with up to four AOVs.
Our control panels are supplied as part of a our smoke ventilation systems. A single control panel can operate up to four smoke vent rooflights.
Accessories our smoke ventilation range include the smoke detectors with LED indicators, manual control points and our special firemans key switch. Every control panel we supply is already configured and are ready to be installed, all of the internal wiring is pre-wired and tested. this means installation is quick and easy and you dont have to worry about wiring issues. Control panels offer an open, close and reset button with LED indicators that are situated behind a break glass panel. The idea of the LEDs is to provide instant status indication, and will show any system faults, show when the system is active and the position of the vent.
When used with a smoke ventilation rooflights the priority control will respond to signals from any of the accessories installed I.E, smoke detectors, manual control points and firemans switch in order of importance. If you require natural ventilation then the control panel is also supplied with a key so you can remove the break glass to enable operation of the open/close/reset buttons to operate the AOV. Our control panels can be installed to operate as a simple centralised stand alone system or a large decentralised or networked system with additional control panels.
Networking requires the installation of a control panel in every fire zone. You can link these to the central control zone utilising firemans switch control points.
Single zones are activated by smoke detectors or manual control points can be overriden by the centrally mounted firemans switches.
Otherwise the control panel can be installed as part of a larger system receiving signals from a BMS via its no voltage monitoring capacity.
|S9 - Smoke Ventilation System (1000 x 1000mm)|
|S11 - Smoke Ventilation System (1200 x 1200mm)|