Best Sellers

S1 - 560 x 560mm Dome Skylight
S1 - 560 x 560mm Dome Skylight

88.00


S9 - 1160 x 1160mm Dome Skylights
S9 - 1160 x 1160mm Dome Skylights

175.00


S4 - 760 x 760mm Dome Skylight
S4 - 760 x 760mm Dome Skylight

120.99


EG S2 - Flat Glazed Rooflight (640mm x 640mm Double Glazed)
EG S2 - Flat Glazed Rooflight (640mm x 640mm Double Glazed)

458.40


EG R19 - Glass Skylight Roof Window (1140mm x 2140mm Double Glazed)
EG R19 - Glass Skylight Roof Window (1140mm x 2140mm Double Glazed)

1,090.00


 New Products
R22B - Skylight Dome (1260 x 1860mm)
R22B - Skylight Dome (1260 x 1860mm)

280.00

Double Glazed Roof Lantern - 1000 x 1000mm
Double Glazed Roof Lantern - 1000 x 1000mm

1,097.50

EG R16 - Glass Roof Skylights (1040mm x 1340mm Double Glazed)
EG R16 - Glass Roof Skylights (1040mm x 1340mm Double Glazed)

796.10

Traditional Roof Lantern - 2000 x 1000mm
Traditional Roof Lantern - 2000 x 1000mm

1,494.00

R22C - Skylight Dome (1260 x 2460mm)
R22C - Skylight Dome (1260 x 2460mm)

440.00





PU Adhesive & Accessories

PU Adhesive - 1000ml

PU Adhesive - 1000ml

14.75 (Ex VAT)

QTY

Product Code: PU-1
Delivery: 3 - 5 Days
Coverage Rate: 50 Tiles/1000ml

PU Adhesive - 1000ml

Specially designed for adhering our Promenade Tiles to virtually all roof membrnes and surfaces; Including bituminous felt roofs, Sanded Asphalt, EPDM, GRP, PVC and almost all other flat roof surfaces. (Please contact us if you are unsure of application).

When the PU is curing the adhesive absorbs moisture from the atmosphere and expands providing a firm support to the tile. This results in an effective and practical fixing method which can even be used in damp and humid conditions. When cured the adhesive retains a degree of flexibility to allow for thermal and structural movement of the tiles and roof which cementitious tile adhesives do not.

PU adhesive is supplied in 1000ml bottles with applicator. One bottle will adhere approximately 50 tiles or 5m2. The adhesive is applied by simply cutting the nozzle at the mark, which will give a 3-4mm bead, applying as per the diagram below. It is very important that the adhesive as applied as per the instructions.



Should too much adhesive be used or should it be applied too close to the edge the expanding action will force the foamed adhesive up through the gaps between tiles. Should this happen do not try to remove when wet! Leave till dry then carefully cut off with craft knife and remove marks with wire wool or similar.

Please Note

Please note that delivery times are estimated, although we aim to get your goods to you on a next day service.
All goods must be checked for damages before signing for the in good condition, damged goods that have been signed for can not be returned.
Any technical instructions or details are provided as guidance only. We strongly reccomend that no work should be carried out or installation companys booked prior to delivery and inspection of your Roofing Products.
To ensure your installation meets the legally required standards; planning and installation should be carried out by a suitably qualified installer.


 We Recommend:

Striated Balcony Tiles - Various Colours
Striated Balcony Tiles - Various Colours

1.49

Riven Promenade Tiles - Various Colours
Riven Promenade Tiles - Various Colours

1.69

Checkerplate Balcony Tiles - Various Colours
Checkerplate Balcony Tiles - Various Colours

1.49